|
DECLARATION OF CONFORMITY
Industrial Devices Corporation
3925 Cypress Drive
Petaluma, CA, 94954
United States
Phone: (707) 789-1000
Fax: (707) 789-0175
Declares under our sole responsibility that our SmartStep series of industrial step motor control modules, consisting of the IDC model number SmartStep, and SmartStep23, operated with or without the FP220 keypad, when installed using the installation procedures contained in the SmartStep operators manual, and the CE Installation Guide, are in conformity with the following European Community directives:
EN 55011 : 1991, Electromagnetic compatibility-
Emission standard
EN 50082-2 :1995, Electromagnetic compatibility -
Generic immunity standard
EN 60204-1:1993 AMD 8436 – Safety of machinery – Electrical equipment of machines, Part 1
EN 61010-1 - Low Voltage Directive of industrial scientific measuring equipment and process control equipment
per the provisions of the Electromagnetic Compatibility Directive 89/336/EEC of 3 May, 1989 as amended by 92/31/EEC of 28 April 1992 and 93/68/EEC, Article 5 of 22 July 1993, per the Machinery Directive 98/37/EC of 22 June 1998, and per the Low Voltage Directive 73/23/EEC of 19 February 1973.
Dave Cary
IDC Vice President of Electronics
July 26, 1999
DECLARATION OF CONFORMITY
Industrial Devices Corporation
3925 Cypress Drive
Petaluma, CA, 94954
United States
Phone: (707) 789-1000
Fax: (707) 789-0175
Declares under our sole responsibility that our SmartStep-240 series industrial step motor indexer/drive modules, consisting of the IDC model number SmartStep-240, when installed using the installation procedures contained in the SmartStep User’s Manual, and the CE Installation Guide, are in conformity with the following European Community directives:
EN 55011: 1991, Electromagnetic compatibility-
Emission standard
EN 50082-2 :1995, Electromagnetic compatibility -
Generic immunity standard
EN 60204-1:1993 AMD 8436 – Safety of machinery – Electrical equipment of machines, Part 1
EN 61010-1 - Low Voltage Directive of industrial scientific measuring equipment and process control equipment
per the provisions of the Electromagnetic Compatibility Directive 89/336/EEC of 3 May, 1989 as amended by 92/31/EEC of 28 April 1992 and 93/68/EEC, Article 5 of 22 July 1993, per the Machinery Directive 98/37/EC of 22 June 1998, and per the Low Voltage Directive 73/23/EEC of 19 February 1973.
Dave Cary
IDC Vice President of Electronics
July 15, 1999
DECLARATION OF CONFORMITY
Industrial Devices Corporation
3925 Cypress Drive
Petaluma, CA, 94954
United States
Phone: (707) 789-1000
Fax: (707) 789-0175
Declares under our sole responsibility that our NextStep series industrial step motor drive modules, consisting of the IDC model number NextStep, when installed using the installation procedures contained in the NextStep Quick Setup and Reference Guide, and the CE Installation Guide, are in conformity with the following European Community directives:
EN 55011: 1991, Electromagnetic compatibility-
Emission standard
EN 50082-2 :1995, Electromagnetic compatibility -
Generic immunity standard
EN 60204-1:1993 AMD 8436 – Safety of machinery – Electrical equipment of machines, Part 1
EN 61010-1 - Low Voltage Directive of industrial scientific measuring equipment and process control equipment
per the provisions of the Electromagnetic Compatibility Directive 89/336/EEC of 3 May, 1989 as amended by 92/31/EEC of 28 April 1992 and 93/68/EEC, Article 5 of 22 July 1993, per the Machinery Directive 98/37/EC of 22 June 1998, and per the Low Voltage Directive 73/23/Eec of 19 February 1973.
Dave Cary
IDC Vice President of Electronics
July 23, 1999
DECLARATION OF CONFORMITY
Industrial Devices Corporation
3925 Cypress Drive
Petaluma, CA, 94954
United States
Phone: (707) 789-1000
Fax: (707) 789-0175
Declares under our sole responsibility that our NextStep-240 series industrial step motor drive modules, consisting of the IDC model number NextStep-240, when installed using the installation procedures contained in the NextStep Quick Setup and Reference guide, and the CE Installation Guide, are in conformity with the following European Community directives:
EN 55011: 1991, Electromagnetic compatibility-
Emission standard
EN 50082-2 :1995, Electromagnetic compatibility -
Generic immunity standard
EN 60204-1:1993 AMD 8436 – Safety of machinery – Electrical equipment of machines, Part 1
EN 61010-1 - Low Voltage Directive of industrial scientific measuring equipment and process control equipment
per the provisions of the Electromagnetic Compatibility Directive 89/336/EEC of 3 May, 1989 as amended by 92/31/EEC of 28 April 1992 and 93/68/EEC, Article 5 of 22 July 1993, per the Machinery Directive 98/37/EC of 22 June 1998, and per the Low Voltage Directive 73/23/EEC of 19 February 1973.
Dave Cary
IDC Vice President of Electronics
July 15, 1999
DECLARATION OF CONFORMITY
Industrial Devices Corporation
3925 Cypress Drive
Petaluma, CA, 94954
United States
Phone: (707) 789-1000
Fax: (707) 789-0175
Declares under our sole responsibility that our B8000 series industrial servo motor control modules, consisting of the IDC model numbers B8001, B8501, B8961, and B8962, operated with or without the FP220 keypad, when installed using the installation procedures contained in the operators manual and CE Installation Guide are in conformity with the following European Community directives:
EN 55011 : 1991, Electromagnetic compatibility-
Emission standard
EN 50082-2 :1995, Electromagnetic compatibility -
Generic immunity standard
EN 60204-1:1993 AMD 8436 – Safety of machinery – Electrical equipment of machines, Part 1
EN 61010-1 - Low Voltage Directive of industrial scientific measuring equipment and process control equipment
per the provisions of the Electromagnetic Compatibility Directive 89/336/EEC of 3 May, 1989 as amended by 92/31/EEC of 28 April 1992 and 93/68/EEC, Article 5 of 22 July 1993, per the Machinery Directive 98/37/EC of 22 June 1998, and per the Low Voltage Directive 73/23/EEC of 19 February 1973.
Dave Cary
IDC Vice President of Electronics
July 26, 1999
|